We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
Welcome to 702 POOLS!
Veteran Owned. Proudly Serving Las Vegas & Henderson
FREE 30-Point Pool Inspection!
$149 FULL Service Pool Maintenance*
(702) 840-1001
Pool maintenance needs in Henderson and Las Vegas change dramatically across the year — a weekly routine that keeps water clear in January will fall badly behind by July. This calendar breaks down what to check, test, and clean each season so your pool stays clear through 100°F+ summers and mild but not frost-free winters. For target chemical ranges, see our chemical balancing guide, and if your pool has already turned green, see our algae prevention guide.
If your pool sat under a cover or ran on minimal chemicals over winter, spring is when it needs a full restart. As daytime highs climb from the 60s into the 90s, warming water speeds up chemical reactions and algae growth, so a pool that looked fine in February can turn cloudy within days once the weather turns. Remove any winter cover, clear out debris that collected over the cooler months, and run the filter through a full cycle before testing. Check all five core levels — free chlorine, pH, alkalinity, cyanuric acid, and calcium hardness — since levels drift during the lower-maintenance winter months. Inspect equipment that saw less use over winter: pump seals, filter pressure, and heater connections should all be checked before peak season begins. Most Henderson and Las Vegas pools need a partial shock treatment in March or April to clear early-season algae before it gets established.
Summer is when Southern Nevada’s climate puts the most stress on pool water. Triple-digit heat and near-constant UV exposure burn through free chlorine in hours rather than days, and evaporation can run a quarter-inch to half-inch per day, so water levels and chemical concentrations shift fast. Test chlorine and pH at least twice a week from June through September — daily is better for pools with heavy swimmer use or little shade. Check water levels every few days and top off as needed, since a skimmer running dry can burn out a pump the same day. Algae risk peaks in summer heat, so brush walls and tile weekly to disrupt early growth before it takes hold. Monsoon season, typically July through September, brings sudden dust storms and downpours that dump debris into pools within minutes, so plan on extra skimming and a filter check after any storm. Clean or backwash filters more often in summer than the rest of the year, since higher bather load and airborne dust clog media faster.
As highs drop from the 100s into the 70s and 80s, chemical demand eases and testing can taper back to once a week. Falling leaves and blowing landscaping debris become more of an issue in neighborhoods with mature trees, so keep skimming through November even as swimming slows down. Fall is a good time for a pre-winter equipment check — inspect the pump, filter, heater, and any timer or automation system before demand drops and problems become easy to overlook. If you plan to reduce service or cover the pool for winter, do a final deep clean and full chemical balance first so the water starts the off-season in good shape.
Las Vegas and Henderson rarely see hard freezes, but cold snaps into the 30s do happen most winters, and unprotected equipment can crack pipes or damage a pump overnight. Run the pump during freeze warnings, especially overnight, to keep water moving through exposed plumbing, and know where your equipment’s freeze-protection settings are if your system has them. Overall maintenance need drops in winter — testing every two weeks is usually enough for pools without a heater running constantly — since cooler water slows both evaporation and algae growth. That said, algae risk isn’t zero: a pool left untested for a month with chlorine near zero can still bloom even in cooler water. Winter’s lower pool usage also makes it the best time of year to schedule resurfacing, tile repair, or equipment replacement, since having the pool out of service for a few days causes minimal disruption.
| Season | Testing Frequency | Key Focus |
| Spring (Mar–May) | Weekly | Startup, full rebalance, equipment check |
| Summer (Jun–Sep) | 2x/week (daily for heavy use) | Chlorine monitoring, water level, algae watch, monsoon debris |
| Fall (Oct–Nov) | Weekly | Tapering chemicals, leaf/debris cleanup, pre-winter check |
| Winter (Dec–Feb) | Every 2 weeks | Freeze protection, low-but-ongoing algae watch, resurfacing projects |
Most Henderson and Las Vegas pools should be started up in March, once daytime highs consistently reach the 70s, giving the water time to be tested, shocked, and rebalanced before the swimming season and heavier algae pressure begin in May and June.
Test chlorine and pH at least twice a week from June through September, and check water levels every few days, since 100°F+ heat and intense UV exposure burn through chlorine and evaporate water far faster than in cooler months.
Less, but not none. Testing every two weeks is typically enough since cooler water slows algae growth and chemical consumption, but freeze protection during cold snaps and periodic checks to prevent a slow algae bloom are still necessary.
Yes. Monsoon storms from July through September can dump dust, leaves, and debris into a pool within minutes, so plan on extra skimming and a filter check after any storm during that stretch.
Keeping up with a seasonal schedule is one of the biggest factors in avoiding algae blooms, cloudy water, and premature equipment wear in Southern Nevada’s climate. If you’d rather not track it yourself, 702Pools’ weekly service plan adjusts visit frequency and chemical attention by season automatically, starting at $149/month. Call (702) 840-1001 or email service@702pools.com for a free 30-point inspection. For more, see our Pool Service FAQs, our chemical balancing guide, and our algae prevention guide.
